What Are The Procedures And Precautions For Driving A Tractor Truck?

Today we will take a look at the process and precautions of driving a tractor truck.
First, the process of driving the tractor
1. Prepare
During traction, the two ends of the traction rope are respectively set on the traction hook and the tow hook of the towed vehicle.
2. Get Started
When pulling with a soft link, you should first determine the contact signals and precautions of the tractor and the tractor being pulled.
3. Driving
When the soft link pulls the driving car, the front car should keep a uniform speed.
4. Turn
When the soft link tractor encounters the Bay Road, the front car should slow down in advance and use gestures and horns to warn the rear car, and should try to drive along the outside of the Bay road.
5. Ramp driving
When going uphill, the front car should stagger a certain position with the rear car to prevent the front car from hitting the rear car when reversing. Keep to the right side of the road when going downhill. Speed up the vehicle properly to prevent the rope from being too loose to control.
6. Braking and parking
Soft link traction driving, no special circumstances, the front car should try to avoid braking the brake, not emergency braking. Parking should choose a wide flat area, the front car should first use gestures to predict the rear car, and then slow down to the side of the road, is expected to use the brake to stop smoothly when the rear car enters the roadside.
Second, driving tractor precautions
1, the first thing you need to pay special attention to is that you must see that there is no car behind the tractor, try to pass as little as possible, less lane change, because the tractor body is long, the lane change is more difficult, overtaking is also very expensive, so try to drive at a constant speed on the lane.
2, because the front and the car are connected with tools, so when braking, to brake from the car body, and the front is not braking, this feeling will be different from other cars, to use this braking method.
3, the tractor is generally transported large goods, the body is very long, so the body should have a good idea when turning, turning at the right Angle, generally the bending Angle is greater than the main car more than one meter, using the big big back way to turn.
4, the reversing of the tractor needs more practice, reversing must see the rearview mirror clearly, slow reversing, because the body of the tractor is too long, so the direction of the reflection is not sensitive, reversing to try to play the steering wheel as little as possible.
5, open tractor weighing is also a skill, to slowly close the car to the pound, but can not press to the pound, at this time, the low speed, fuel door, so that the car can immediately jump out of the feeling, this is in order to quickly weigh, weigh speed may be fast, but also safe as the premise.

6, when driving the tractor uphill as far as possible when the conditions permit, if the clutch is used to reduce gear when uphill, the power of the car will be reduced rapidly, which is manifested as no strength for climbing, and frequent shifting will increase the fuel consumption of the car.